Denon DN-X100 - Handbuch (Seite 10)

10
ENGLISH
6 ROTATING INPUT SELECT SWITCHES
1. Disconnect the power.
2. Remove knobs from the Top Panel.
3. Remove the 6 screws attaching the Top Panel.
4. Remove the 2 screws attaching the Switch unit.
5. Rotate the Switch unit to the desired location.
6. Reinstall the 2 screws holding the Switch unit.
7. Reinstall the Top Panel and reattach knobs.
Cable 1
RCA pin plug
Sleeve=GND
Ring=Cold
Tip=Hot
Balanced Cable 2
Sleeve=GND
Ring=Cold
Tip=Hot
Balanced (1/4” TS)
Cable 3
Sleeve=GND
Ring=Cold
Tip=Hot
Balanced (1/4” TRS) Balanced
Cable 4
1=GND
2=Hot
3=Cold
1=GND 2=Hot
3=Cold
Sleeve=GND
Ring=Cold
Tip=Hot
About the Cables
Unbalanced
(For BALANCED MASTER OUT)
(For MIC)
(For BALANCED MASTER OUT)
Balanced (1/4” TRS)
XLR3-12C
Balanced
XLR3-11C
(For RCA PINJACK)
Switch unit