Denon DN-X100 - Handbuch (Seite 8)

8
ENGLISH
4 SPECIFICATIONS
• Phono Inputs: 2 Stereo Unbalanced RCA jacks
Input Impedance 50 k Ω/kohms
Level –50 dBV (3 mV)
• Line Inputs: 2 Stereo Unbalanced RCA jacks
Input Impedance 20 k Ω/kohms
Level –14 dBV (200 mV)
• EQ Control (Line): 3 Bands
Control Range HI: –30 dB to +10 dB (at 16 kHz), –38 dB to +10 dB (at 20 kHz)
MID: –38 dB to +10 dB (at 0 1 kHz)
LOW: –38 dB to + 0 6 dB (at 0 60 Hz)
• Mic Inputs: 1 Mono Active Balanced 1/4” TRS jack
Input Impedance 2 k Ω/kohms
Level –54 dBV (2 mV)
Frequency Response 20 Hz to 20 kHz (±3 dB)
S/N 66dB
• EQ Control (Mic): 2 Bands
Control Range HI: –12 to +12 dB (at 10 kHz)
LOW: –12 to +12 dB (at 100 Hz)
• Master Output:
Balanced Stereo Active Balanced 1/4” TRS jack
Output Impedance 150 Ω/ohms
Level +4 dBm (1.23 Vrms) (600 Ω/ohms load)
Frequency Response 20 Hz to 20 kHz (±2 dB)
THD+N LINE : Below 0.05 % PHONO : Below 0.07 %
S/N LINE : 85 dB PHONO : 76 dB
Cross Talk Over 75 dB
Unbalanced Stereo Unbalanced RCA jacks
Output Impedance 1 k Ω/kohms
Level 0 dBV (1 Vrms)V (10 k Ω/ohms load)
Frequency Response 20 Hz to 20 kHz (±2 dB)
THD+N LINE : Below 0.05 % PHONO : Below 0.07 %
S/N LINE : 85 dB PHONO : 76 dB
Cross Talk Over 75 dB
• Headphone Output: Stereo
Output Impedance 33 Ω/ohms
Level 0 dBV (1 Vrms) (32 Ω/ohms load)
• Power Source: AC 10 V 750 mA x 2
• Power Supply, Consumptions:
USA, Canada AC 120 V ± 10 %, 60 Hz (AC adaptor : AA-26)
Europe, Asia, Oceania AC 230 V ± 10 %, 50 Hz (AC adaptor : AA-27)
• Unit Size 220 (W) x 226 (D) x 85.4 (H) mm
• Mass 2.8 kg AC adaptor : 0.5 kg
✽ Specifications and design are subject to change without notice for purpose of improvement.