Denon AVR-1306 - Handbuch (Seite 32)

ENGLISH
29
Basic Operation Basic Operation
ENGLISH
Recalling preset stations
1 Watching the display, press the SHIFT button to
select the preset memory block.
2 Watching the display, press the PRESET • (+)
or ª ª (–) button to select the desired preset
channel.
Preset stations
1 Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
3 Press the SHIFT button and select the desired
memory block (A to G).
2 Press the MEMORY button.
4 Press the PRESET ( + ) or ( – ) button to select the
desired preset channel (1 to 8).
• To preset other channels, repeat steps 1 to 4.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
5 Press the MEMORY button again.
• Store the station in the preset memory.
RDS (Radio Data System)
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the
regular radio program signal.
The following three types of RDS information can be received
with this unit:
2 Program Type (PTY)
PTY identifies the type of RDS program.
The program types and their displays are as follows:
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
2 Traffic Program (TP)
TP identifies programs that carry traffic announcements.
This allows you to easily find out the latest traffic conditions in
your area before leaving home.
2 Radio Text (RT)
RT allows RDS stations to send text messages that appear on
the display.
News
Current Affairs
Information
Sports
Education
Drama
Culture
Science
Varied
Pop Music
Rock Music
Easy Listening
Music
Light Classical
Serious Classical
Other Music
NOTE:
The operations described below using the RDS, PTY and RT
buttons will not function in areas in which there are no RDS
broadcasts.
Weather
Finance
Children’s
programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentaries
Manual tuning
1 Set the input source to “TUNER”.
3 Press the MODE button to set the manual tuning
mode.
Check that the display’s “AUTO” indicator turns off.
2 Watching the display, press the BAND button to
select the desired band (AM or FM).
4 Press the TUNING ( + ) or ( – ) button to tune in
the desired station.
The frequency changes continuously when the button is
held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
TUNING
SHIFT RDS RT
BAND
INPUT SELECTOR PRESET PTY
TUNING
BAND
SHIFT
TUNER
MODE
MEMORY
PRESET