JB-Lighting DMX Controller - Handbuch (Seite 16)

DMX-Controller
16
RECALL-Function
You have the possibility to copy pictures from each program to another. Therefore you choose the picture and
program, in which you will copy an another picture, by pressing the buttons under the left LED for the picture
and under the right LED for the program. Then you press the RECALL-button, choose the picture you want to
copy and finish the copying by pressing the RECALL-button once again.
You finish the programming of pictures by pressing the EDIT-button.
Attention:
Never pull out plug while EDIT-mode because the Controller can loose the programs !
LOOP-function
By pressing the button LOOP you have the possibility to create loops of pictures and programs.
For loop of pictures press the LOOP-button for one time. In the left LED a number begins to sparkle. This
number means the last picture-number. The number can be changed by pressing the buttons under the left
LED.
To finish the LOOP-Function for pictures, press the LOOP-button.
For the loop of programs, press the LOOP-button twice, then in the right LED a number begins to sparkle.
This number means the last number of program. The number can be changed by pressing the Joystick.
The loop of programs begins always with program No. 1. You have got the possibility to create loop beginning
with program 1 and to add program No. 2, 3, 4, 5, etc.
If you do not want to create a loop of programs, please pay attention that the loop of programs stands still on
"1".
To finish the LOOP-Function for programs, press the LOOP-button once again.
Call off of the show
You have got altogether three different possibilities to perform the show:
1. Manual call off