Revox Outdoor 80 - Handbuch (Seite 21)

11
Modifying the colour
of the speakers
The following points should be
noted if you want to modify the
colour of your speakers so that
they fit better into their environment:
a)
Remove the speaker grille carefully
from the speaker housing using a
bradawl, or similar. The grilles are
not glued to the housing; they are
just pressed on to it.
b)
Cover the front of the speaker with
cardboard held in place with
masking tape and ensure that no
spray mist can get in at the side of
the baffle during painting.
c)
As well as covering the baffle, the
speaker connecting terminals
should be covered during painting
to avoid creating any transfer
resistances.
Technical details
Load capacity
The power capacity details given
on the Revox rating plate refer to
a linearly set sound controller at
the amplifier.
A short-term overload will not
damage your Revox speakers. If
the chassis should be damaged
by a long-term overload, this will
be clearly identifiable for a service
technician. In this case, you are
no longer covered by your Revox
guarantee.
Protective circuit
The outdoor speaker has a
separate protective circuit for the
woofer and tweeter, which reduces
the level of the speaker in the case
of an overload and reactivates it
automatically after a certain time.
The length of time is dependant on
the extend of the overload.
En
g
li
sh