Parkside PNTS 1500 B3 - Handbuch (Seite 6)

6
GB IE CY
Intended purpose
The appliance is intended for domestic wet
and dry vacuuming in, for example, the
house, work room, car or garage. The ap-
pliance can also be used as a blower or to
suction up water.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
Vacuuming of flammable or explosive
materials or those which endanger health
is prohibited. The manufacturer will not be
held responsible for injuries resulting from
use which does not comply with the direc-
tions, or from incorrect use.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete.
The appliance is supplied with the motor
head fitted ( 3). To remove the motor
head, open the sealing clips ( 4).
Dispose of the packaging material cor-
rectly.
3 Motor housing
5 Collector
6a 2 feet with wheels and acces-
sory fittings
6b 2 feet with castors and acces-
sory fittings
11 Fluted filter (11a) and filter
cover (11b) (already installed)
12 Paper filter bag
13 Foam filter
14 Accessory bag
15 Handle with air regulation
16 Telescopic suction tube
18 Vacuum hose
19 Powertool hose
20 Powertool reduction adaptor
piece
21 Switchable household nozzle
22 Crevice nozzle
23 Cushion nozzle
24 Car nozzle
25 2 retaining brackets
4 cross recessed screws
Instruction Manual
Description of operation
The wet and dry vacuum cleaner is
equipped with a robust stainless steel
container for waste collection. The guiding
wheels and castors make the appliance
very easy to manoeuvre. The suction flow
is switched off by a float during wet vacu-
uming once the waste tank is full. In addi-
tion, the machine has a blower function
and a socket for the connection of a further
electrical appliance.
The following describes the function of the
operating parts.