Operation making nut waffl es/patterned waffl es – Silvercrest SWEW 750 A1 Benutzerhandbuch
Seite 46
43
GB
SWEW 750 A1
Operation
Making nut waffl
es/patterned waffl
es
1) Select the “nut waffl es” or “patterned waffl es” removable plates and insert
them. Always ensure that you insert the top removable plate in the top half
of the appliance and the bottom removable plate in the bottom half.
CAUTION – PROPERTY DAMAGE!
►
Never use two diff erent removable plates at the same time.
2) Close the lid and lock it with the lid locking device 0.
3) Insert the plug into a mains power socket. The orange “Power” indicator
lamp q illuminates.
4) As soon as the appliance has heated up, the green “Ready” indicator
lamp w illuminates.
5) Undo the lid locking device 0, open the lid and put approximately 1/2 tsp.
of batter (see “Recipes” chapter for recipes for nut waffl es and patterned
waffl es) into each of the moulds/patterns in the bottom removable plates.
NOTE
►
When using patterned waffl es, ensure that the batter has been distributed
across all parts of the pattern. Otherwise, parts of the pattern may sub-
sequently be missing.
6) Close the lid and lock it with the lid locking device 0.
CAUTION – PROPERTY DAMAGE!
►
To avoid damaging the non-stick coating of the nut waffl es/patterned waffl es,
always remove your waffl es with a plastic or wooden spoon or some other
suitable, non-metallic implement.
7) The nut waffl es/patterned waffl es are ready after about 3 - 4 minutes.
Undo the lid locking device 0, open the cover and remove the nut waffl es/
patterned waffl es.
8) If you have fi nished preparing your nut waffl es/patterned waffl es, please
disconnect the mains plug from the mains socket.
9) Allow the nut waffl es/patterned waffl es to cool down a little and trim any
excess from the edge of the nut waffl es/patterned waffl es with a knife.
10) Fill the nut waffl es/patterned waffl es with the required fi lling. Spread a little
of the fi lling towards the edge of the nut waffl es/patterned waffl es and place
the matching counterpart on top so that both halves stick together, creating
a hollow form.