Electrolux T37850 - Handbuch (Seite 51)

1. Open loading door.
2. Unscrew hinge A from the front of the machine and take off the loading door.
3. Remove cover plates B. To do this, insert a thin screwdriver into the slots as shown in
the illustration, press downwards slightly and pry out the cover plates.
4.
Use an appropriate tool and exert pressure to unfasten locking block C from the
snap-on fixture, take out and re-insert on the other side having rotated the block
through 180°.
CAUTION!
There is a little spring under locking block C. To put all parts together correctly, look
at the pictures:
A
C
A
B
B
Installation 51