Cooking duration” function – Zanussi ZOU 482 Benutzerhandbuch

Seite 36

Advertising
background image

Electrolux

36

“Cooking Duration” function

This function allows the oven to automatically switch

off at the end of a programmed cooking duration time.

Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
repeatedly to select the “Cooking Duration” function. The

relevant pilot lamp

will start flashing. Then, proceed

as follows:
To set the duration time:
1.
Press button “ ” or “ ”.

2. After the setting is carried out, wait for 5 seconds: the

"Cooking Duration" pilot lamp

will come on and

the display will revert to the time of day.

3. When cooking time is over, the oven will be

switched off automatically and an acoustic alarm will

be heard, while the pilot lamp will start flashing. Turn

the oven function and the thermostat control knob to

zero.

To switch off the acoustic alarm, press any button.

NOTE: turning the acoustic alarm off will reset the

oven to manual, and if the oven function and the

thermostat knobs are not set to zero the oven will

start to heat again.

To cancel the duration time:
1.
Press button

repeatedly to select the “Cooking

Duration” function. The relevant pilot lamp

will

flash and the display will show the remaining

cooking time.

2. Press button “ ” until the display shows “0:00”.

After 5 seconds the pilot lamp will go out and the

display will revert to the time of day.

Advertising