Zanussi ZOU 482 - Handbuch (Seite 38)

Electrolux
38
“Cooking duration” and “End of
cooking time” combined
The functions “Cooking duration” and “End of
cooking time” can be used simultaneously to set the oven
to switch on and off automatically at a later time.
1. With the “Cooking duration” function
(carry out
the cooking duration setting as described in the rele-
vant chapter) set the duration time. Then, press
button
: the display will show the programmed
setting.
2. With the “End of cooking time” function (carry
out the End of cooking setting as described in the re-
levant chapter) set the end of cooking time.
The relevant pilot lamps will come on and the
display will show the time of day. The oven will
switch on and off according to the set programmes.
“Minute minder” function
The minute minder alarm will sound at the end of a
timed period, but the oven will remain on, if it is in use.
To set the minute minder:
1. Press button
repeatedly to select the “Minute
minder” function. The relevant pilot lamp will start
flashing.
2. Then, press button “ ” or “ ” (maximum: 2
hours, 30 minutes).
3. After the setting is carried out, wait for 5 seconds: the
“Minute minder” pilot lamp will come on.
4. At the end of the timed period, the pilot lamp will start
flashing and an acoustic alarm will be heard. To
switch off the acoustic alarm, press any button.
To cancel the minute minder:
1. Press button
repeatedly to select the “Minute
minder” function. The relevant pilot lamp will
flash and the display will show the remaining time.
2. Press button “ ” until the display shows “0:00”.
After 5 seconds the pilot lamp will go out and the
display will revert to the time of day.
How to switch off the display
1. Press two programmer push buttons
simoultaneously and keep them pressed for about 5
seconds. The display will switch off.
2. To switch on the display, press any button.
The display can be switched off only if no
other functions have been set.