Troubleshooting – Xoro HSD 2050 Benutzerhandbuch

Seite 82

Advertising
background image

38

HSD 2050

Engl

ish

TROUBLESHOOTING

Symptom Correction

No remote control

•

Check the batteries in the remote control

•

Are the polarities correct?

•

Batteries are depleted. Please uses new one.

•

Point the remote control unit at the Infrared sensor and
operate.

•

Remove the obstacles between the remote control and
the Infred snesor

•

Operate the remote control unit at a distance of not
more than 5 meters from the Infrared sensor.

Language can not be
changed

•

There is only one language on the on the disc
recorded.

•

Choose in the Title menu of the Video DVD the
language which do you want.

Angle can not be
changed

•

The angles may be recorded for only specific scences
and are not normally everytime available.

No key operation

•

Turn the unit off and then back to on after a couple of
minutes.

Y Pb Pr activation

•

Please connect the video cable properly.

•

Please pay attention to the colour coding of the cable.

•

Select in the setup settings the option YUV.

•

Change the source input on the TV set

CVBS, S-Video and
SCART with distorted,
devided or no picture
picture

•

You had press the P-Scan button during you uses the
CVBS, SCART or S-Video output. Press the P-SCAN
button again.

USB Stick is not
recognizes

•

Please connect the USB-Stick to the USB port on the
rear side of the device.

•

Press the DVD/USB button and choose the option USB
(press the DOWN button). Confirm the selecting by
pressing the PLAY button

Jerking/Jadder during
playback of video from
USB-Sticks

•

Please pay attention to the encoding parameters (refer
page 28).

•

Please pay attention that the bit rate of the video is not
higher than 2000 kbps

Advertising