Zanussi ZWH6140P - Handbuch (Seite 22)

After having cleaned the dispenser and the
drawer recess, replace it.
Cleaning the drain filter
The filter permits to hold fluff or foreign bodies
left unawares in the laundry.
The pump must be cleaned regularly.
To clean the filter, proceed as follows:
• turn programme selector dial to position ;
• unplug the appliance;
• open the door;
• turn the drum and
align the filter cov-
er (FILTER) with
the arrow on the
door seal;
• open the filter cov-
er by pressing the
special hook and
by rotating the cov-
er upwards;
Warning! Keep
the filter cover
open until the filter re-
moval.
• before removing
the filter, remove
any fluff or small
objects from
around the filter;
• remove the filter and clean it under the tap;
• if necessary, place
the filter cover in
the right position
again.
• open the filter cov-
er and insert the fil-
ter again;
The filter is inserted correctly when the
indicator on its top is visible and
blocked.
• close the filter cov-
er;
• insert the mains
plug again.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, it takes
a long time to fill with water, the starting button
flashes red or the display (if available) shows
the relevant alarm (see chapter "What to do
if..." for more details), check if the water inlet
filters are blocked .
To clean the water inlet filters:
22
www.zanussi.com