Loading cutlery and dishes – Zanussi ZDI112X Benutzerhandbuch

Seite 8

Advertising
background image

Caution! Do not fill the rinse aid dispenser with

other products (e.g. dishwasher cleaning agent,

liquid detergent). This can cause damage to the appli-

ance.

Adjusting the dosage of rinse aid

M A X

1 2

3 4

+

The rinse aid dial is set at

the factory at position 3.

To increase or decrease

the dosage refer to 'What

to do if...'

Loading cutlery and dishes

Helpful hints and tips

Caution! Only use the appliance for household

utensils that are applicable for dishwashers.

Do not use the appliance to clean objects that can absorb

water (sponges, household cloths, etc.).
• Before you load cutlery and dishes, do these steps:

– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.

• While you load cutlery and dishes, do these steps:

– Load hollow items (e.g. cups, glasses and pans)

with the opening down.

– Make sure that water does not collect in the con-

tainer or in a deep base.

– Make sure that cutlery and dishes do not lie inside

one another.

– Make sure that cutlery and dishes do not cover other

cutlery and dishes.

– Make sure that glasses do not touch other glasses.
– Put small objects in the cutlery basket.

• Plastic items and pans with non-stick coatings can

keep water droplets. Plastic items do not dry as well

as porcelain and steel items.

• Put light items in the upper basket. Make sure that the

items do not move.

Caution! Make sure that the spray arms can move

freely before you start a washing programme.
Warning! Always close the door after you load or

unload the appliance. An open door can be

dangerous.

1

Arrange service dishes

and large lids around the

edge of the lower basket.

2

1

2

Use the cutlery grid. If the dimensions of the cutlery

prevent use of the cutlery grid, remove it.

8

Advertising