Xoro HSD 7799 - Handbuch (Seite 69)

HSD 7799 ENG-29
Engl
ish
DVB-T
The HSD 7799 has integrated a DVB-T TV tuner. To receive the terrestrial broadcast, you need to
connect the player with an antenna. The best case is to use the roof antenna. If your position is
nearby the transmitters, than you can a passive or an active indoor aerial.
Connect the cable from the antenna to the to RF ANT jack on the left side of the player.
Please pay attention that you can receive the DVB-T in your area.
If you want to use the DVB-T than you have to change the mode by the player. Please press the
DVD/AV/TV button on the remote control or the DVD/AV/TV button on the device to change the to
the DVB-T mode.
Fast installation operation
Connect this unit and other equipments related
according to “EASY INSTALL”:
1. Turn on the unit, then the Welcome window is
popped:
A. Get to the setup menu with Ÿ/ź button,
and select the proper setting parameters
with Ż/Ź button: Region (Default setting
is France), and OSD Language (English
is default).
B. Once the setting is over, move to OK with Ÿ/ź button, then press OK button to enter Auto
Scan menu and press it again to start auto scan.
C. Exit the Main Menu when auto scan is finished, then press OK to pop up Channel List,
where you can choose a preferred channel with Ÿ/ź button before pressing OK to start
viewing it.
2. If no Welcome menu appears when the unit is turned on:
A. Press SETUP button, then enter Tools menu by pressing Ÿ/ź button to Load Factory
Default. (You have to perform this operation when the unit is used for the first time or the
software has been upgraded).
B. Press EXIT to quit Tools menu and get to Installation menu with Ÿ/ź button, then choose
Auto Scan and get to Search menu with OK, and press OK again to start auto scan.
C. After scan, exit the Main Menu, and press OK to display Channel List where you can
choose a channel with Ÿ/ź button and press OK to view it.
First Time Installation