Xoro HRS 8500 - Handbuch (Seite 84)

30 HRS 8500
Engl
ish
Timer Programming by EPG
By pressing the OK button (special broadcast
selected) in the EPG menu all information's are
saved in the Timer.
It is advisable to set the starting and stopping time of
recording some minutes before/after the broadcast because
they never begin in time. Other options are Repeat and
Mode. Repeat defines if the broadcast is recorded once or
continuous. Mode has to be set to Record if you want to
record a broadcast.
The programmed broadcast show up in the timer program
list.
Note
Recordings assume connected USB media!
Recording
If you want to record the current TV program simply and quickly, first connect a USB memory to the
USB port and then press the REC button. The recording starts immediately. You can stop the
recording by pressing the STOP button. Confirm the safety query with the OK button.
The recording takes place in a file ending with TS.
Time Shift Function
In order to use the Time Shift function, you must first connect a USB memory to the HRS 8500. You
can choose if you want to store the Time Shift file permanently or use them only temporary. Please
go to the settings by pressing the MENU button, Navigate to
USB —> PVR Configure —> Store Timeshift
And set the option to On to store and set to Off for temporary file.
Press during the live image the || (Pause) button on the remote control. The live picture pause and
the other program is stored on the USB memory. You can continue after you pause the show:
1.
PLAY/PAUSE button to playback the Time Shift
2. >> / << button to use fast forward or fast rewind
Quitting Time-Shift
Press EXIT button to stop the Time Shift function. You will now be asked whether you want to end the
function. Press the OK button on the Yes box and the Time-Shift is stopped.
Recorder