Xoro HRS 8520 - Handbuch (Seite 70)

16 HRS 8520
Engl
ish
Connection
Second SCART output
You can also use the second SCART output to record the broadcast on a VCR. Connect to the VCR
with a SCART cable to the VCR output of the HRS 8520.
For more information, see the instructions for operating the VCR.
SCART Input
You can use the second SCART port as an input to transmit the video and audio signals to a TV.
Connect a VCR or DVD player with a SCART cable to the VCR SCART connector of HRS 8520.
If the SCART VCR is switched to signal input mode, than the HRS 8520 can display the incoming
signals only by the SCART TV output. An image display by HDMI is not possible in this case.
To activate the input press the DTV/VCR button. To switch off the SCART input function, press the
DTV/VCR button again.
Notes:
1.
Switch on the device.
2. If the SCART VCR is switched to signal input mode, than the HRS 8520 can display the
incoming signals only by the SCART TV output. An image display by HDMI is not possible in
this case.
3. If the SCART input is active, the HRS 8520 no function than transmit the signals.
4. Stop the SCART input by pressing the DTV/VCR button.
Second SCART port (VCR)