Xoro HRS 8520 - Handbuch (Seite 79)

HRS 8520 25
Engl
ish
First steps
8. Single Cable Distribution—Unicable
Single Cable Distribution is a satellite TV technology that enables the delivery of broadcast
programming to multiple users over a single coaxial cable, and eliminates the numerous cables
required to support consumer electronics devices such as twin-tuner Digital Video Recorders (DVRs)
and high end receivers. Without single cable distribution, providing full spectrum access for multiple
receivers, or receivers with multiple tuners, in a single family home has required a separate coaxial
cable feeding each tuner from the antenna equipment (either multiple LNBs, a multi-output LNB or a
multiswitch distribution system) because of the large bandwidth requirement of the signals. A
European industry standard for distributing satellite signals over a single coaxial cable - CENELEC
EN50494 - has been developed by a consortium led by SES Astra. Unicable uses an integrated
software and hardware solution that allows Unicable-certified Digital Video Recorders and receivers
to multiplex selected programming when using Unicable LNB or multi-switching products.
Unicable LNB
Special LNBs have been developed for use in single cable distribution systems. The LNB further
includes a mixer to combine the user bands together and a microcontroller to receive the instructions
as to which frequency is required by each user and control the SCR chips.
Procedure:
1.
Cancel the process here with the EXIT button.
2. Press the MENU button and go into the settings menu.
3. Press the ◄/► button repeatedly until the option
Channel Search is active.
4. Press to reach the ▲/▼ key until the option Unicable
Setting.
5. Open the Unicable Setting with the OK button.
6. Enable the option Unicable (Yes) with the ◄/► button.
7. Press the ▼ button and enter the Channel No and the
corresponding frequency for the first receiver.
NOTE:
Remove the channel number and the
corresponding frequencies of the instructions of
the Unicable LNB and make sure that the correct
settings. Otherwise, the receiver is working or not
working properly and it is the message "No signal
displayed.
Channel Search