WolfVision VZ-8plus 4 User Manual - Handbuch (Seite 19)

18
WARNING:
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and the anti-reflex coating!
Cleaning
Cabinet: Clean the cabinet by gently wiping it with a soft, lint free cloth.
Lenses: Clean the lenses by gently wiping with a soft, lint free cloth (do not use a paper tissue!). Clean by
breathing on the lens to create moisture then wipe with a lint free cloth (If need be, use a special
optical cleaner only!).
MAINTENANCE
The software (firmware) of your Visualizer (including the o ) can easily be upgraded to the
latest version. The firmware update can be done via USB, Ethernet (LAN) or USB-stick.
Firmware update files can be downloaded for free at www.wolfvision.com/support. Updates via USB or
Ethernet/LAN can be made with the WolfVision Connectivity Software.
Updates via USB stick needs a prepared USB stick like: file system FAT16 or FAT32, folder in the root
named "VZ" by default which includes the firmware file (folder name has to match the listed folder name in
the on-screen menu Advanced Settings / USB Settings.)
n-screen HELP
Firmware Upgrades
Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects
situated between the Visualizer and the infrared remote control, and weak batteries, interfere with
reception.
Infrared Remote Control
If you want to work with more than one Visualizer in the same room, the units should be set to different
infrared codes, in order to control them all individually.
The IR code of the Visualizer has to match the code of the remote control.
To change the IR code, enter the "Advanced Settings / Miscellaneous Settings" and
set the "IR Code" to A, B, C or D (code A is default). To change the IR code on the remote control,
simultaneously press PRESET 1, PRESET 2
and ZOOM TELE
ress PRESET 1, PRESET 2 and ZOOM WIDE
on-screen menu, go to
(#27) (#34). Each time this key
combination is used, the code switches from A to B, C, D ... A ...in the given order.
For resetting the remote control to code A, simultaneously p
.
The LED shows the selected code (it flashes one time for code A, two times for code B, three times for code
C and four times for code D).
Different IR Codes
If the Visualizer can only be controlled from a close distance, or if it
cannot be controlled at all with the infrared remote control, you may
have to change the batteries.
Open the cover on the back of the remote control and replace the two
1.5V AAA (Code LR03) batteries with new ones.
Check the polarity of the batteries!
Recycle the batteries!