WolfVision VZ-8plus 4 User Manual - Handbuch (Seite 22)

21
One Push White Balance:
Keep the LIGHT key (#4) pressed for 2 seconds to perform one push white balance.
Activating the on-screen menu:
Keep the MENU key (#47) (EXTERN key) on the camera head pressed for 2 seconds to activate the on-
screen menu. Use the FOCUS keys (#45) to navigate and the PRESET key (#43) and the FREEZE key
(#44) to select. For the help function, press the HELP / ? key (#46).
Resetting the selected menu item:
For resetting only the selected item keep the HELP / ? key (#46) pressed for 2 seconds.
Storing Preset 1:
Keep the PRESET key (#43) on the camera head pressed for 2 seconds.
Recalling Preset 1:
Press the PRESET key (#43) on the camera head quickly.
Switch Output Resolution to XGA:
Keep both FOCUS keys (#22) pressed for 4 seconds to switch the output resolution to XGA at 60Hz.
CODES - Short Keys
Storing presets:
Keep the desired PRESET key (#27) pressed for 2 seconds.
Recalling presets:
Press the desired PRESET key (#27) quickly.
Storing images:
Keep the desired MEMORY key (#39) pressed for 2 seconds.
Recalling images:
Press the desired MEMORY key (#39) quickly.
Activating the on-screen menu:
Press the MENU key (#23) to activate the on-screen menu. Use the Number keys (#25) to navigate and
Number 5 key (#40) to select. For the help function, press the HELP key (#24).
Resetting single items of the on-screen menu:
Select the desired item in the on-screen menu and keep the Number 7 key (#24) on the remote control
pressed for 2 seconds.
Change IR code:
Change the IR code in the
"Advanced Settings / Miscellaneous Settings" and set the "IR
Code" to A, B, C or D (code A is default). To change the IR code on the remote control, simultaneously press
both PRESET 1+2 keys
and the ZOOM TELE key
ress PRESET 1, PRESET 2 and ZOOM
WIDE
on-screen menu
(#27) (#34). Each time this key combination is used, the
code switches from A to B, C, D ... A ... in the order given.
For resetting the remote control to code A, simultaneously p
.
The LED on the remote control shows the selected code (it flashes one time for code A, two times for code
B, three times for code C and four times for code D).
IR-Remote Control
Base and Camera head