WolfVision VZ-9.4F User Manual - Handbuch (Seite 11)

Power-on preset:
The power-on preset is automatically activated when switching on the unit.
The settings are: zoom size: width approx. 20cm (DIN A5), autofocus: on, auto iris: on.
As soon as the Power Indication LED stays green illuminated, you can start working with the Visualizer.
The behavior of the unit once the power has been supplied or after the POWER key has been pressed can
be changed in the unit's on-screen menu (see page 18).
Setting Up the Visualizer
The working surface of the Visualizer has a special crystalline white color, which is especially designed for
perfect reproduction of transparencies.
In the following cases, an optional lightbox is recommended:
- If the transparency is very dark
- If the transparency is very wavy and causes reflections
- If the room light causes reflections on a transparency
The optional whiteboard foil can be used for direct annotation with special whiteboard markers. WolfVision
offers spare whiteboard foils.
More information at www.wolfvision.com /Products/Accessories
Working Surface (#2)
Slide
Place the slide onto the built-in light field, turn the camera head until
the slide is in the middle of the recorded image and switch on the back
light by touching the LIGHT key (#16). The camera zooms in and
focuses on the the slide automatically.
Picking-up Slides
Additionally the built-in LCD monitor eliminates the need for an extra
control monitor. This monitor can show different signals, like always
live image from the Visualizer, even when the signal on main output is
frozen, or always the same than the main output (selectable in the on-
screen menu - see page 18). The on-screen menu is also visible on
this LCD monitor.
Positioning on the working surface
1. Connect the power pack to the power-input (#27).
2. Connect your display device (projector, monitor, video
conferencing unit etc.) to the appropriate output of
the Visualizer (#18, #19, 28 or #29).
IMPORTANT:
For choosing the right output please read the
detailed description on pages 19ff!
3. Using the pull ring (#7) only to lift the arm upwards.
Camera head and light automatically move into the
working position. The Visualizer is switched on
automatically. Alternatively the Visualizer can be switched on by
touching the POWER key
.
IMPORTANT:
To fold the Visualizer, use pull ring only (#7)!
(#17 or #55)
Monitor
10
Slide
#9 PRESET
FREEZE
FOCUS-
FOCUS+
EXTERN
MENU ? AF
#9 PRESET
FREEZE
FOCUS-
FOCUS+
EXTERN
MENU ? AF