WolfVision VZ-C30 User Manual - Handbuch (Seite 9)

8
FREEZE
The current image can be frozen by pressing the programmed PRESET-key 4 .
The FREEZE-key (PRESET) also works as image memory key if pressed for 2 seconds (see below).
The behavior of the freeze function can be changed in the on-screen menu (see page 9).
(#1 )
9-IMAGE MEMORY
Split image of 9 picture memory
When pressing the ALL-key (#25) for 4 seconds, a menu appears on the screen asking if you would
like to erase all stored pictures (black picture) or if you would like to fill the memory with “snapshots”.
When choosing “snapshot” the Visualizer stores a new image every second until the 9 memory
locations are full. The Ceiling Visualizer is equipped with a memory backup battery. It stores the
pictures in the memory when the power supply is disconnected for 1-4 weeks.
Images can also be stored by pressing the
FREEZE-key (PRESET) for 2 seconds. The image will be
stored in the next available memory (1-9). If the memory is full, an on-screen message will appear.
The functional settings of the memory feature can be changed in the on-screen menu (see page 9).
You can store 9 images and recall them by just pressing
one of the numerical keys
(#31) on the infrared remote control:
Storing an image: Press one of the MEMORY-keys (#31)
for more than 2 seconds
Recalling an image: Press one of the
MEMORY-keys (#31)
quickly
By pressing the All-key (#25) a split image with all 9 pictures
of the memory can be displayed.
The LAN connection (10BASE-T/100BASE-TX) can be used for controlling the Ceiling Visualizer over a
computer network, image transfers and firmware updates.
The following protocols are supported: TCP/IP, ICMP and ARP.
:
/
Supported Browsers are Internet Explorer, Netscape Navigator and Mozilla.
Standard settings (changeable): IP-address, Subnet-mask, Gateway, DHCP-Server
Image Transfer Resolution: Still Image: 1024x768 (or 512x384), Live Image: 160x120
Please check the separate ETHERNET / LAN description on our homepage at:
www.wolfvision.com support.
Ethernet / LAN
WolfVision Visualizers offer the possibility of programming three presets
for the functions: Zoom, Focus, Iris, Light, Image, Text, Freeze, White Balance,
Positive/Negative. They can be recalled by pressing one of the three PRESET-keys (#14) on the
remote control.
This function is very useful for example if a user requires one preset for papers on the working surface,
one for working with slides (bottom light) and one for a high object. During his presentation the user just
has to press one of the
PRESET-keys when he changes from one object to the other.
For programming a preset just adjust every function as required and then keep one of the PRESET-
keys pressed for more than 2 seconds. The on-screen menu tells you when the preset is stored.
Black/White and
PRESET FUNCTION
Quickly pressing: Recalling a preset
More than 2 seconds: Saving a new preset