AEG Beat 15 - Handbuch (Seite 15)

15
UK
t
Press (Left soft key) to show “MELODY 1“.
t
Press / to browse the melody list. The respective melody will be
played when browsing the melody list.
Note:
The selected melody will only be played when you receive a call, if you
subscribe to Caller Display and the incoming number matches the
stored number.)
t
Press (Left soft key) to confirm, and the entry will be stored.
7.9.3 Delete a redial number
t
Follow Steps 1 and 2 in section 7.9.1.
t
Press
(Left soft key) and / to select “DELETE“.
t
Press (Left soft key) to confirm, and the entry will be deleted.
7.9.4 Delete all redial list entries
t
Follow Steps 1 and 2 in section 7.9.1.
t
Press
(Left soft key) and / to select “DELETE ALL“.
t
Press (Left soft key) to show “CONFIRM?“.
t
Press (Left soft key) to confirm. All entries will be deleted and the
display will show “EMPTY“.
7.10 Find the handset
You can locate the handset by pressing on the base station. All the
handsets registered to the base will produce the paging tone and flash
“PAGING“ on the display for 60 seconds. You can stop the paging by
pressing / /
(Right soft key) on any handset or on the base
again.
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
7.11 Make an Internal Call
This feature allows you to make internal calls, transfer external calls from
one handset to another handset or from a handset to the base and
make conference calls. If the called handset or base is not answered