AEG Beat 15 - Handbuch (Seite 23)

23
UK
t
Press (Left soft key) and then to enter the time in 24-hour mode.
t
Press (Left soft key) and then enter the date in the format you set
in Section 10.1.1.
t
Press (Left soft key) to confirm.
Note:
>If time has been set before, the current time will display, otherwise,
“HH:MM” will display.
>If date has been set before, the current date will display, otherwise,
“DD-MM-YY” will display.
10.2 Alarm settings
You can set an alarm on any handset. When an alarm is set, the
icon displays on the LCD. When the alarm time is reached, the icon
and ”ALARM ON” flash on the handset display and the alarm tone
rings for 30 seconds. You can press any key to disable the alarm. If the
snooze function is activated, the alarm will sound again at the end of
the snooze period of seven minutes.
Note:
>A key press will still disable the alarm even if the handset keypad is
locked and when the alarm rings.
>The alarm volume level is the same as the setting of the handset
ringer volume. If the handset ringer is set to “VOLUME OFF“, the
alarm still sounds at “VOLUME 1“ level.
>During an external call or internal call, if an alarm is set and when
the alarm time is reached, the ALARM icon and “ALARM ON“ will
still flash.
An alarm tone will be emitted from the earpiece to notify user the
alarm time is reached. Once the user presses any key or presses
and holds to disable the alarm, the display will revert to the call
duration.
>During paging or ringing, the alarm will not sound when the alarm
time is reached. However, if the snooze function is enabled and
there is no paging or ringing, the alarm will sound again at the end
of the snooze period.