ADAM Audio P11A - Handbuch (Seite 16)

16
Active 2-ways bass reflex loudspeaker
Woofer 1
Basket ø 7“ / Paper
ART Tweeter 1
Diaphragm area 2830 mm 2 / 4.5 inch 2
Equivalent diaphragm ø 60 mm / 2.5“
Speed transformation ratio 4:1
Diaphragm weight 0,17 g
Built-in amplifiers 2 (Class 1)
AC Voltage
100 - 120 V~, 50 / 60 Hz 3
220 - 240 V~, 50 / 60 Hz 3
Woofer channel 1/2 100 W / 150 W
Tweeter channel 1/2 100 W / 150 W
Control Panel
Input Sensitivity ±10 dB
Low shelve > 6 kHz ± 6 dB
High shelve < 150 Hz ± 6 dB
Tweeter gain ± 4 dB
General Data
Frequency response (± 3 dB) 42 Hz - 35 kHz
Crossover frequency 1800 Hz
THD >80 Hz at 90 dB in 1 m ≤ 1%
SPL with sine wave acoustic output in 1
m, 100 Hz - 3 kHz ≥ 107 dB
Max. peak acoustic output in 1 m per pair ≥ 117 dB
Impedance 10 kΩ
Height x Width x Depth 330 x 210 x 280 mm
Weight 10 kg (22 pounds)
Warranty 5 years
Input XLR
Operating temperature 0° C bis 40° C (32° F bis 104° F)
Storage temperature -30° C bis 70° C (-22° F bis 167° F)
Humidity Max. 90 % not condensing
11. Technical Data
1 = long term IEC 265-8-Wrms / 10 min
2 = nominal IEC 265-8 = Peak Power 5 µsec
3 = pay attention to the selected voltage on the rearside of the speaker