ADAM Audio P11A - Handbuch (Seite 8)

8
3. Speaker Placement
The Stereo Triangle
If the loudspeaker is going to be used for stereo applications, the optimum
listening position should be located in the middle of a stereo triangle. This
means that your listening position will be located at the top of an imaginary
equilateral triangle and the two loudspeakers should be placed at the other
two points of this triangle.
Surround Placement
Speaker positioning for multi-channel stereo purposes is ideally based on
a circle with speakers placed at 0° (Center), 30° (Front Right), 110° (Rear
Right), 250° (Rear Left), 330° (Front Left), with the listener being the circle’s
center (Radius between 0.7-2.0 m). This ITU recommended configuration may
vary depending on the purpose of the control room (music or film). However,
it is recommended to create a symmetrical listening position with the front
side and surround speaker pointing to the listener’s ear.
Figure 5: Surround set up
3.3
3.4
Figure 4: Stereo Triangle
• both loudspeaker and the listening
spot should be a equilateral triangle
• approx. the same distances
between loudspeakers and the lou-
dspeakers / the listening spot
• alignment towards listening spot