Retsch EasySieve - Handbuch (Seite 36)

Main Window - Description of the Menu Items
36
Sieving machine:
AS 200 control interface:
the AS 200 control sieving machine is driven
automatically by EasySieve. The serial interface can be selected by means of the
settings.
AS 200 tap interface:
The AS 200 tap sieving machine is controlled automatically
by EasySieve. The serial interface can be selected by means of the settings.
AS 200 jet interface:
The AS 200 jet sieving machine is controlled automatically
by EasySieve. The serial interface can be selected by means of the settings.
AS 300 control interface:
The AS 300 control sieving machine is controlled
automatically by EasySieve. The serial interface can be selected by means of the
settings.
AS 400 control interface:
The AS 400 control sieving machine is controlled
automatically by EasySieve. The serial interface can be selected by means of
settings.
AS 450 Control Interface:
The AS 450 control sieving machine is controlled
automatically by EasySieve. The serial interface can be selected by means of the
settings.
Other sieving machine:
for documentation purposes the name of the sieving
machine being used must be entered in the “designation” window in the sieve
report.
Sieve time:
Input of the sieving time in min:sec
Amplitude:
Amplitude during sieving, adjustable for AS 200 control, AS 300
control and AS 450 control.
Speed:
Speed during sieving for AS 200 jet and AS 400 control.
Open mesh/negative pressure:
the “open mesh” function can be selected in
addition for the AS 200 jet. In this case the speed is fixed at 10 rpm. If the sieving
machine is equipped with pressure regulation, negative pressure can be selected
in mbar too.
Sieve base acceleration [g]
: as an alternative to the amplitude/speed, sieve base
acceleration can be set in the AS 200 control, AS 300 control, AS 400 control and
AS 450 control sieving machines.
Interval operation:
interval operation can be switched on for the AS 200 control,
AS 300 control, AS 400 control and AS 450 control sieving machines.
Interval time:
Duration of the interval. Depending on the time entered in the time
window (AS 200 control, AS 300 control and AS 450 control in sec, AS 400 in min)
the sieving machine stops briefly and then begins again.
If the AS 200 control, AS 300 control and AS 400 control options are used, the
sieving machine parameters are automatically transferred and set there.
Balance settings:
Manual input:
The weights are entered by hand at the time of the sieving (sieving
item menu).
Using the balance:
The weight is inputted automatically by pressing the key on
the Mettler balance.
Other balance:
Another balance is used, which can output the weight through the
serial interface. The connection can be freely configured by means of the settings.
The connection must be configured in conformance to the specifications given by
the manufacturer or in accordance with the settings made on the balance.
The connection to the balance can be configured in the windows underneath.