Measuring units – Retsch EasySieve Benutzerhandbuch
Seite 76
Trend Analysis Window - Description of the Menu Items
76
If required, fixed limits can be entered for the y axis (“upper limit” and “lower
limit”).Otherwise the limits are set automatically according to the range of
fluctuations in the measurements.
With limit lines:
In each trend graph limit lines can be defined as required for the left y axis, which
make it clear to the user when measurements exceed certain limits or fall short of
them. The y-values for the limit lines can be entered then as upper and lower limits.
The first coordinate system is always active. If the 2
P
nd
P
coordinate system option is
selected, 2 graphs are shown underneath each other in the trend graph window.
The parameters for the second coordinate system can be selected in the same
way as for the first coordinate system.
Pos: 10.17 /00005 Ü berschriften/1.1.1 Überschriften/111 Maß ei nheiten @ 2\mod_1254210254320_9.doc @ 16692 @ 3 @ 1
10.3.2 Measuring Units
Pos: 10.18 /00020 BDA Software/20010 EasySi eve Kapitelsammlung/0008 EasySieve Trendanal ysefenster/0808 EasySieve M odul M aß einhei ten @ 2\mod_1254226675815_9.doc @ 17212 @ @ 1
The measurement units to represent the trend analysis can be set here.
Fig. 61: Units for presenting the trend analysis
The selection of days/hours/minutes is effective only if the x axis was configured as
“time”.
Pos: 10.19 /00005 Ü berschriften/1.1 Überschriften/1.1 Ü berschriften BDA/11 Extr as - Befehl e des Menüs @ 2\mod_1254142652581_9.doc @ 16285 @ 2 @ 1