Installation instructions – Thermalright Macho Rev.A(BW) Benutzerhandbuch
Seite 10
Advertising
7
Installation Instructions:
Step 1:
Step 2:
Step 3:
Step 1 : Part Installation
Take out Macho cooler from the paper box.Remove the TY-147 from the cooler by pulling the Fan
Clips upwards in order to give room for ease of installation. And leave the fan clips on the Heatsink Body.
Do not remove them. Apply Anti-Vibration Padding to 4 corners on the Heatsink Body.
Step 2 : Place the motherboard on top of the Back Plate. See the four Screw Pillars go through the four
holes around the processor socket.Cap the four Screw Pillars with the four Screw Nuts.Make sure the
side with a washer is facing the Back Plate.
Step 3 :
Place the Anchoring Mount on the Screw Nuts. Use the four M3L6 Screws to fix the Anchoring Mount on
to the Screw Pillars.
Advertising