Installation instructions, Step 1: step 2: step 3: step 4 – Thermalright Macho Rev.A(BW) Benutzerhandbuch
Seite 6
3
Installation Instructions:
Step 1:
Step 2:
Step 3:
Step 4:
1366
775
1156
1155
Step 1 : Part Installation
Take out Macho cooler from the paper box.Remove the TY-147 from the cooler by pulling the Fan
Clips upwards in order to give room for ease of installation. And leave the Fan Clips on the Heatsink
Body. Do not remove them. Apply Anti-Vibration Padding to 4 corners on the Heatsink Body.
Step 2 : Backplate Installation
Choose the platform (775/1155/1156/1366) you are in use. Make four M3L10 Screw Pillars go through
the Metal Back Plate from bottom towards top.And then place the Metal Back Plate on the table. Put the
four Washers (for Intel) around the Screw Pillars.
Step 3 : 775 backplate cap
Note: When installing on a 775 platform, please
first insert the Back Plate Cap into the opening on
the Back plate, make sure you have the Cap facing
downwards. (Only for 775).
Step 4 : Place the motherboard on top of the Back
Plate. See the four Screw Pillars go through the
four holes around the processor socket.Cap the
four Screw Pillars with the four Screw Nuts.Make
sure the side with a washer is facing the Back
Plate.