Macho rev.a (bw), The ultimate cooling solutions, Step 4: step 5: step 7: step 8 – Thermalright Macho Rev.A(BW) Benutzerhandbuch
Seite 11: Step 6
Macho Rev.A (BW)
The Ultimate Cooling Solutions!
www.thermalright.com
8
Step 4:
Step 5:
Step 7:
Step 8:
Chill Facto
r
2g
Chill Facto
r
2g
Step 6:
Step 7 : Fan Installation
Place the included TY-147 onto the Heatsink
Body. And then secure it with the Fan Clips, by
pulling the Fan Clips to place the four ends at the
four holes on the TY-147.
Step 4 : Applying Thermal Paste
Apply the Thermal Paste to the base of the Heatsink and the surface of the CPU evenly.
Step 8 : Installation completed
Plug in the fan connector to the CPU PWM Fan
socket on the motherboard. Installation complete.
Step 5: Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make
the Mounting Plate go through the Heatsink Body.
Then use the supplied Screw Driver to fasten the
two M3L6 Screws to Secure the Mounting Plate.
Step 6: Easy Access
Pass the supplied Screw
Driver through the central
hole of the Heatsink Body,
for easier access to the
M3L6 Screw underneath
the cooler.
Chill Facto
r
2g
Chill Facto
r
2g