Weidmuller Advanced Line Unmanaged Switch - Handbuch (Seite 20)

20
4 4 T Te ec ch hn niic ca all d da atta a
M Me ec ch ha an niic ca all D Da atta a
Dimensions H x W x D 140 x 44 x 156 mm
DIN-rail according DIN 50022
A Am mb biie en ntt C Co on nd diittiio on ns s
Operation temperature -40°C ... +75°C
Storage temperature -40°C ... +85°C
E Elle ek kttrriic ca all D Da atta a
Power supply The power supply of the IE-SWx-ADVANCED must
be provided exclusively by a power pack which
complies with DIN EN 60742 or VDE 0551.
Rated operation voltage 10 ... 36 VDC / 8 ... 24 VAC
Rated operation capacity 20 W / 6 A
Redundancy redundant power supply
Data rate 10BaseT / 100BaseTX (copper)
100BaseFX (fiber)
G Ge en ne erra all S Sp pe ez ziiffiic ca attiio on ns s
Compliance IEEE 802.3x
Internal memory 256 Kbyte / per 8 Port Buffer
4 K MAC addresses per 8 Port
Optical output power max. -14 dBm
Optical Budget 8 dB for 62,5/125 µm multimode-cable
4 dB for 50/125 µm multimode-cable
13 dB for 9/125 µm singlemode-cable
S Se eg gm me en ntt L Le en ng gtth h
10 Base T Copper 100 m
100 Base TX Copper 100 m
100 Base FX Multimode fiber 2000 m Full duplex
• Connector SC and ST
1310 nm / 62.5 / 125 µm optical budget 8 db
50 / 125 µm optical budget 4 db
• Connector SCS
ca. 20.000 m in Voll-Duplex bei 0,5 dB / km
1310 nm / 9 / 125 µm optical budget 13 dB
A Au uffb ba au u
Case Aluminum
Degree of protection IP20
Our stated optical budget in dB contains some margin for aging, cable repair and other
obstructions.
The given optical power is the optical power at the time of manufacturing. This power
may slightly change, e.g. due to aging.
Please consider a sufficient margin when using the optical power values for calculating the
possible cable length.