Clearaudio CARTRIDGE ALIGNMENT GAUGE IEC - Handbuch (Seite 7)

IEC Einstellschablone
Seite/Page 7  clearaudio electronic GmbH 2013
Data: The overhang adjustment is absolutely correct for any pivot distance.
The value of the offset angle is medium for pivot distances between 222mm and 327mm with
a maximal deviation from optimum of only 0,17° with optimization forIEC inner groove radius
and only 0,12° with optimization for inner groove radius according Clearaudio-
Recommendation (r=75mm). These deviations are far below reading precision. The offset
angle medium value for pivot distances within the o.m. range is absolutely correct for a
distance of 264mm.
Package contents
1. Aluminiumbar including steel pin and hex key wrench (not shown in picture)
2. Scaleplate including sliding housing for aluminiumbar
1
2