2 klemmenbelegung dsl.r, 2 terminal assignment dsl.r, Klemmenbelegung dsl.r – Baumer HOG 16 + DSL Benutzerhandbuch
Seite 24: Terminal assignment dsl.r

21
Baumer_HOG16M-DSL_II_DE-EN (13A2)
MB163 - 11055776
6
Elektrischer Anschluss / Electrical connection
6.2.2
Klemmenbelegung DSL.R
Version mit drei Schaltausgängen, welche
drehzahlabhängig geschaltet werden. Bei
Stillstand des Gerätes oder Drehzahl n
kleiner Schaltdrehzahl n
s
ist der jeweilige
Schaltausgang
high, bei n ≥ n
s
low.
Bei Auftreten eines internen Fehlers (z. B.
einer Scheibenverschmutzung, so dass
die gezählte Impulsanzahl nicht stimmt)
schalten die Ausgänge auf
low.
6.2.2
Terminal assignment DSL.R
Version with 3 switching outputs that can
be switched according to the speed. If
the device is at standstill or the rotational
speed n is less than the switching speed
n
s
then the corresponding switching output
will be
high. If n ≥ n
s
then it will be
low.
If an internal error occurs (for instance, dirt
on the disk, so that the counted pulse rate
is incorrect) then the outputs will switch to
low.
R1, R2, R3, GND
Steuerleitungen zum Relaismodul DS 93 R (Zubehör)
Cable to relay module DS 93 R (accessory)
RS 485
Schnittstelle für PC oder Laptop (Adapter erforder-
lich). Programmierung des DSL über mitgelieferte
Software, siehe
separates Benutzerhandbuch
„Software für digitalen Drehzahlschalter DSL“ auf
CD.
Interface for PC or Laptop (adapter required). Pro-
gramming of the DSL via the included software as
described in the
separate user manual “Software
for the Digital Speed Switch DSL” on CD.
Ansicht Y
siehe Abschnitt 6.2.1.2
View Y
see section 6.2.1.2
DS 93 R
Zubehör/accessory