Baumer HMG 11 Benutzerhandbuch
Seite 13

MB097T1 - 11055706
Baumer_HMG11-T1_II_DE-EN (14A1)
10
4.5
Lieferumfang SSI-Haube,
Version mit Anschlussklemmen
4.5
Scope of delivery of the SSI cover,
Version with connecting terminal
Vorbereitung / Preparation
4
16a
16
16b
16c
16d
4.6
Lieferumfang SSI-Haube,
Version mit Flanschdose und Rund-
steckverbinder
4.6
Scope of delivery of the SSI cover,
Version with flange connector and mat-
ing connector
15
SSI-Haube
15a Kombi-Torx-Schraube M4x32 mm (A2)
15b Scheibe A4, DIN 137 (A2)
15c Buchse D-SUB 15-polig zum Anschluss
an Stecker D-SUB 15-polig am
Drehgebergehäuse
15d Anschlussklemmen, siehe Abschnitt 7.4.1.2.
15e Kabelverschraubung M20x1,5
für Kabel ø5-13 mm, siehe Abschnitt 7.4.1.
16
SSI-Haube
16a Kombi-Torx-Schraube M4x32 mm (A2)
16b Scheibe A4, DIN 137 (A2)
16c Flanschdose M23, 12-polig,
siehe Abschnitt 7.4.2.
16d Rundsteckverbinder,
siehe Abschnitt 7.4.2.
15
SSI cover
15a Screw with torx and slotted drive M4x32 mm
15b Washer A4, DIN 137 (A2)
15c Connector D-SUB (female) 15-pin for connec-
tion to the connector D-SUB (male) 15-pin
on the encoder housing
15d Connecting terminal, see section 7.4.1.2.
15e Cable gland M20x1,5
for cable ø5-13 mm, see section 7.4.1.
16
SSI cover
16a Screw with torx and slotted drive M4x32 mm (A2)
16b Washer A4, DIN 137 (A2)
16c Flange connector M23, 12-pin,
see section 7.4.2.
16d Mating connector,
see section 7.4.2.
15c
15d
15
15a
15b
15e