9 technical data, 1 technical data - electrical ratings, 2 technical data - electrical ratings (encoder) – Baumer POG 11 + ESL (version B10) Benutzerhandbuch
Seite 32: Technical data, Technical data - electrical ratings, Technical data - electrical ratings (encoder)
29
Baumer_POG11-ESL_II_DE-EN (14A2)
MB070.2 - 11055675
9
Technical data
9
Technical data
9.1
Technical data - electrical ratings
• Interference immunity:
EN 61000-6-2:2005
• Emitted interference:
EN 61000-6-3:2007/A1:2011
9.2
Technical data - electrical ratings (encoder)
• Voltage supply:
9...30 VDC* (HTL-P, TTL - version R)
5 VDC ±5 % (TTL)
• Consumption w/o load:
≤100 mA
• Pulses per revolution:
300...5000 (As ordered)
• Phase shift:
90° ±20°
• Scan ratio:
40...60 %
• Reference signal:
Zero pulse, width 90°
• Output frequency:
≤120 kHz
≤300 kHz option
• Output signals:
K1, K2, K0 + inverted
Error output (only EMS)
• Output stages:
HTL-P (power linedriver)
TTL/RS422
(As ordered)
• Sensing method:
Optical
9.3
Technical data - electrical ratings (speed switches)
• Switching accuracy:
±4 % (≤1500 rpm)
±2 % (>1500 rpm)
• Switching hysteresis:
≤30 % of switching speed
• Switching delay time:
≤40 ms
POG 11 + ESL 90
• Switching outputs:
1 output, speed control
• Output switching capacity:
≤6 A / 250 VAC
≤1 A / 48 VDC
• Minimum switching current:
100 mA
POG 11 + ESL 93
• Voltage supply:
12 VDC ±10 %
• Consumption w/o load:
≤5 mA
• Switching outputs:
3 outputs, speed control
• Current each output:
40 mA (DC)
* The voltage supply is 9...26 VDC at TTL - version R for versions <95 pulses per revolution