Baumer ITD21H00-HT - Handbuch (Seite 26)

Technical data
 26 Baumer_ITD21H00-HT_II_DE-EN_1310.indd
12 Technical data
12.1 Mechanical data
Size (flange) ø58 mm
Shaft type ø10...14 mm through hollow shaft
Protection DIN EN 60529 IP 54
Operating speed ≤6000 U/min
Starting torque ≤0,015 Nm (+20 °C)
Motor shaft tolerance 0,25 mm axial
0,1 mm radial
Materials Housing: aluminium
Shaft: stainless steel
Operating temperature -30...+120 °C
Relative humidity 90 % non-condensing
Resistance DIN EN 60068-2-6
Vibration 20 g, 55-2000 Hz
DIN EN 60068-2-27
Shock 100 g, 6 ms
Weight approx. 150 g
Connection Board connector, 8-pin
12.2 Electrical data
Voltage supply 5 VDC ±5 %
Reverse polarity protection Yes
Consumption w/o load ≤100 mA
Pulses per revolution 100...80000
Reference signal Zero pulse, width 90°
Sensing method Optical
Output frequency ≤300 kHz (TTL)
Output signals A, B, N + inverted
Output stage TTL linedriver (short-circuit proof)
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-3