Baumer AMG 11 Benutzerhandbuch
Seite 11
MB086T1 - 11055695
Baumer_AMG11-T1_II_DE-EN (14A1)
8
6
Profibus-Haube
6a
Kombi-Torx-Schraube M4x32 mm
6b Scheibe A4, DIN 137 A2
6c
Buchse D-SUB 9-polig zum Anschluss
an Stecker D-SUB 9-polig am
Drehgebergehäuse
6d Anschlussklemmen, siehe Abschnitt 7.1.2.
6e Kabelverschraubung M16x1,5
für Kabel ø5-9 mm
6
Profibus cover
6a
Screw with torx and slotted drive M4x32 mm
6b Washer A4, DIN 137 A2
6c
Connector D-SUB (female) 9-pin for connec-
tion to the connector D-SUB (male) 9-pin
on the encoder housing
6d Connecting terminal, see section 7.1.2.
6e Cable gland M16x1,5
for cable ø5-9 mm
7
CANopen®-Haube
7a
Kombi-Torx-Schraube M4x32 mm
7b
Scheibe A4, DIN 137 A2
7c
Buchse D-SUB 9-polig zum Anschluss
an Stecker D-SUB 9-polig am
Drehgebergehäuse
7d
Anschlussklemmen, siehe Abschnitt 7.2.2.
7e
Kabelverschraubung M16x1,5
für Kabel ø5-9 mm
7
CANopen® cover
7a
Screw with torx and slotted drive M4x32 mm
7b
Washer A4, DIN 137 A2
7c
Connector D-SUB (female) 9-pin for connec-
tion to the connector D-SUB (male) 9-pin
on the encoder housing
7d
Connecting terminal, see section 7.2.2.
7e
Cable gland M16x1,5
for cable ø5-9 mm
Vorbereitung / Preparation
4
6c
7c
6d
7d
6e
7e
6
7
6a
7a
6b
7b
6e
7e
6e
7e
4.3
Lieferumfang CANopen®-Haube
4.3
Scope of delivery of the CANopen® cover
4.2
Lieferumfang Profibus-Haube
4.2
Scope of delivery of the profibus cover