8 technical data, 1 technical data - electrical ratings, 3 technical data - electrical ratings (sinewave) – Baumer MHGP 100 Benutzerhandbuch
Seite 26: Technical data, Technical data - electrical ratings, Technical data - electrical ratings (square-wave), Technical data - electrical ratings (sinewave)
23
Baumer_MHGP100-T1_II_DE-EN (14A3)
MB210T1 - 11121634
8
Technical data
8
Technical data
8.1
Technical data - electrical ratings
• Interference immunity:
EN 61000-6-2:2005
• Emitted interference:
EN 61000-6-3:2007/A1:2011
• Approvals:
CE, RoHS
8.2
Technical data - electrical ratings (square-wave)
• Voltage supply (Signals):
RN...C: 4,5...30 VDC (TTL/RS422)
TN...C: 5 VDC ±5 %
(TTL/RS422)
HN...C: 10...30 VDC
(HTL)
UN...C: 5...30 VDC
(TTL/HTL)*
• Consumption w/o load:
≤160 mA
• Pulses per revolution:
64...131072 (As ordered)
• Phase shift:
90° ±10°
• Scan ratio:
40...60 %
• Reference signal:
Zero pulse, width 90°
• Sensing method:
Magnetic
• Output frequency:
≤2 MHz
• Output signals:
A+, B+, R+, A-, B-, R-
• Output stages:
HTL
TTL/RS422
(As ordered)
8.3
Technical data - electrical ratings (sinewave)
• Voltage supply (Signals):
PN...C: 4,5...30 VDC (SinCos)
• Consumption w/o load:
≤160 mA
• Sinewave cycles per turn:
64...8192 (As ordered)
• Phase shift:
90° ±5
• Reference signal:
Zero pulse, width 90°
• Sensing method:
Magnetic
• Output signals:
A+, B+, R+, A-, B-, R-
• Output stage:
SinCos 1 Vpp
• Difference of SinCos amplitude:
≤20 mV
• Harmonics typ.:
-40 dB
• DC offset:
≤20 mV
• Bandwidth:
400 kHz (-3 dB)
* At +UB = 5 VDC: TTL/RS422; At +UB = 10...30 VDC: HTL