Lupine Betty TL2 /s - Handbuch (Seite 11)

20 21 Betty TL2 Betty TL2
Deut
sc
h
Engli
sh
2
Charging Read this manual before using
Carry a spare light with you at all times, as the product can potentially fail unexpectedly at any time.
Heat development:
Our Betty TL2 is not a normal flashlight. With continuous operation at maximum power, the enclosure
may become hot; therefore, always ensure a safe distance to flammable materials.
Caution! When operating the lamp at maximum power, the light may be dimmed after several minutes
depending on the ambient temperature. This is normal and will reduce the lamp's temperature.
Water resistance:
All Betty TL2 components are waterproof and can of course be used under extremely severe conditions.
The lamp complies with IP-68 protection class but is NOT a diving lamp and is NOT suitable for use
under water.
Before seriously using your flashlight for the first time, the battery requires charging to
ensure maximum capacity. For this purpose, please unscrew the battery tank from the
flashlight head.
The power jack is located on the top of the battery tank.
For charging details also refer to the
separate charger manual.
Flashlight and charger are ready for use upon delivery,
however, the battery is merely partly charged.

Safety instructions:
Warning! Avoid looking directly into the light emitted by the light or shining the light
into your own eyes or the eyes of another person. If the light accidentally shines into your
eyes, close your eyes and move your head out of the light beam. Do not use any strongly
focusing optical device to look at the light beam.
In cases where the light is used in a public or commercial setting, users should be
provided with training concerning the safety measures for laser light.
1
Betty TL2 S
Betty TL2