Lupine Betty TL2 /s - Handbuch (Seite 15)

28 29 Betty TL2 Betty TL2
Deut
sc
h
Engli
sh
Special Functions
5 5
Alternative Capacity Indicator (lamphead)
Press and hold the button until 2 green LEDs light up.
 release the button
Before activating the alternative capacity indicator, your battery must be fully charged.
The range of battery capacities you can choose from
will start automatically.
3 Ah
5 Ah
7 Ah
9 Ah
4 Ah
6 Ah
Disable indicator
8 Ah
10 Ah
Default setting
You must approximate the correct range for
your battery; e.g., for an 6.6Ah you would
select 7 Ah (5 green LEDs).
Similair to our Smartcore batteries the red
LEDs on the lamphead will now approxi-
matley show the remaining capacity.
Attention! When the lamp-head is discon-
nected from a battery, the indicator will
not work correctly until the battery is fully
recharged
4.
3.
2.
1.
Adjusting backlight low-battery warning:
Use this program to adjust the onset of the low-battery warning.
The threshold can be selected as shown below.
Press and hold the button, until 3 green LEDs light up.
 release the button
2.
1.
Default setting
6.0 V 5.6 V 5.2 V
6.2 V 5.8 V 5.3 V
6.4 V 6.0 V 5.4 V
6.6 V 6.2 V 5.5 V
6.8 V 6.4 V 5.6 V
Backlight: blue red green
2.
Recover factory settings:
Press and hold the button, until 5
red LEDs turn on.
 release the button
1.
Disconnect the battery, and all factory settings will be restored.
Example: 70% Remaining capacity =
3 red LEDs on, 1 red LED blinking