Citizen Systems CBM1000 - Handbuch (Seite 159)

— 141 —
GS FF (Only for Label Paper)
[Function] Printing and discharging the label.
[Code] <1DH><0C>H
[Outline] This command prints the data in the printer buffer and cuts
discharged the label
[Caution] Valid only if "Label" is chosen for paper type.
Operation depends on the selection mechanism:
No auto cutter:
• The label is advanced to the manual cutter.
• The LED flashes, indicating that the printer is ready for manual
cutting and subsequent FEED switch operations.
• When the FEED switch is pressed, the next label is advanced
to the print position.
With auto cutter:
• The printed label is advanced to the auto cutter position, where
it is completely cut off.
• The next label is advanced to the print position.
[See Also] FF, GS <
With neither exfoliation mechanism nor auto cutter:
Without exfoliation mechanism but with auto cutter:
With both exfoliation mechanism and auto cutter:
• The printed label is advanced to the exfoliation mechanism sensor.
• The label is peeled off the base and removed.
• The next label is advanced to the print position.