TechniSat AudioMaster BT - Handbuch (Seite 17)

32 33
Playback via Bluetooth
Registration requirements
- Bluetooth must be activated on the
mobile end device
- the mobile end device must support
Bluetooth 2.0 at least
- the mobile end device must be within range of
the audioMaster Bt (max. 10 m)
Registration process
- select
BT input
- Press the “Bluetooth-Pairing“ button
-
BTP
appears on the display
- You now have 30 seconds to register your mobile
end device
- start the search run on your mobile end device
- select “audioMaster Bt ” as the playback device
- Once confirmed, the connection will be made
automatically and will appear as
Con
in the
display
- if the connection fails the message FAI
will appear
- if the mobile device requires an access code
enter 0000
Operating a mobile end device
- the device most recently connected to the
audioMaster Bt connects automatically when
Bluetooth is activated and the input for Blue-
tooth playback has been selected. in this case
the message
Con will appear.
- start the playback of a medium on your mobile
end device and the sound will automatically be
generated by the audioMaster Bt.
Display indications
the audioMaster Bt has a multifunctional display that lights up blue for approx. 5 seconds in response to a remote con-
trol command. the possible readouts and their meanings are shown below. the standby mode of the audioMaster Bt is
indicated by a red led light. When your audioMaster Bt is in operation this led is green.
Input
Soundmode
Playmode
tV input (optical)
TV
Volume (0 – 99)
V30
stereo
ST
Pairing Mode
BTP
dVd input (coaxial)
DVD
Mute
---
surround
SUR
Connection established
CON
auX input (analogue)
AUX
Bass level (+/– 6)
B 6
disconnected
DIS
Bluetooth
BT
treble level (+/– 6)
T 6
error message
FAI
Bluetooth
English English
BT
BTP
Con Fai
- audioMaster Bt -
BLUETOOTH
PAIRING