TechniSat AudioMaster BT - Handbuch (Seite 18)

34 35
Extended functions
the menu for extended sound functions offers you the chance to correct out-of-synch
playback, to activate the output for an external subwoofer and to adjust the playback
to suit the selected location.
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
if you press and hold the key marked “sound” on
the remote control for longer than 3 seconds you
will enter the “extended functions” menu and the
display
LIP
will appear on the soundbar.
You can now use the Volume +/- keys to delay the
playback in 10 ms steps.
Press the “sound” key briefly once more and the
display
sub
will appear
the Volume +/- keys can also be used to switch
the output for an external subwoofer on or off.
Please note: when the sub-Out is activated the
playback of the soundbar will be filtered at 80 Hz.
Press the “sound” key again briefly one more time
and the display
eq
will appear
now use the Volume +/- keys to choose between
three pre-set equalizer settings to adjust the play-
back to suit the location.
EQ-1 for a free-standing audioMaster Bt
e.g. on a sideboard with a flat-screen tV on
the wall (factory setting).
EQ-2 for a set-up where a flat-screen tV
is positioned on top of the audioMaster Bt .
EQ-3 for a set-up where the audioMaster
Bt is in a rack or on a shelf.
Exit menu
Press and hold the “sound” key again for longer
than 3 seconds to exit the “extended functions”
menu.
if the soundbar does not receive any input instruc-
tion from the remote control within a period of 30
seconds the menu navigation returns automatically
to normal mode.
IR learning function
the audioMaster Bt can learn the infrared code of your tV remote control and therefore allows you to control the functions of the sound-
bar and tV device via your remote control. You can allocate the instructions for the soundbar to any key of the tV remote control. When
choosing a key make sure that the instructions for the soundbar do not conflict with the tV device. We recommend that you deactivate the
internal loudspeaker of the tV device once the soundbar is connected.
1 Hold the tV remote control in position
2 switch the soundbar on
3 Press and hold the “On/standby” key of the soundbar
remote control for approx. 5 seconds
4 the display shows a flashing IRL
5
Press the chosen function on the audioMaster Bt
remote control e.g. “Volume +”
6 now the display shows a flashing v
7 Within 20 seconds press the key you wish to allocate
to this function on the tV remote control
8 Once this has been successfully allocated the display
will show OK and you can continue with the
programming of the next key function, e.g. “Volume –“
9 if the display shows FAI this means the allocation
has failed and you should repeat steps 4 to 8
Exit menu
Press and hold the “On/standby” key again for
longer than 5 seconds to exit the “iR learning
function” menu.
if the soundbar does not receive any input instruc-
tions from the remote control within a period of
60 seconds the menu navigation returns to normal
mode automatically.
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
tV remote control
Lip
sub
EQ
EQ1 EQ2 EQ3
on off
English English