AUDIOLINE BabySense5-Video - Handbuch (Seite 14)

12
7. Should the design of the crib/bed not allow proper installation with the control unit holder, plea-
se use the optional hanging hook (see illustration 6) and hang the control unit from the bottom
edge of the crib.
8. Press control unit holder or hanging hook firmly into slot in back of control unit (see illustration
5 and 6).
9. Place mattress firmly on top of sensor pads. If the mattress cannot be in contact with the sen-
sor pads, or if the bed base is soft, padded or contains springs, place extra plywood on the bed
base, place the sensor pads on the plywood and place the mattress firmly on top.
IMPORTANT: To avoid possible danger from sensor cords, ensure that excess cords are
pulled back under the mattress and are not visible or reachable.
Control
Unit
Cable Cable
Bed/Crib
base
Control unit holder
I llustration 5
base
Bed/Crib
Cable
Control unit holder
Cable
llustration 5 I
Sensor | Do not use | Sensor
Slot
Battery
cover
Blocked socket
DO NOT USE
“Sensor”
socket
I llustration 7
Opening
recess
Speaker
Blocked socket
Sensor | Do not use | Sensor S
Slot
cket
ensor”
Blocked sock
cover
Battery
US DO NOT
llustration 7 I
cess
pening
Speaker
llustration 7
Sensor | Do not use | Sensor
Slot
I
llustration 6
Sensor | Do not use | Sensor
Hanging hook
ensor S Sensor | Do not use |
Slot
ing hook Hang
tion 6 a llustr
I
Sensor | see not u | Do r o so Sen
ing hook
Installation