H3C Technologies H3C S5830 Series Switches - Handbuch (Seite 9)

5
WARNING Power Cord Set:
The power cord set must be approved for the country where it is used:
U.S.A. and Canada
• The cord set must be UL approved and CSA certified
• The minimum specification for the flexible cord is:
• No. 18 AWG
• Type SV / SVT or SJ / SJT
• 3 conductor
• The cord set must have a rated current carrying capacity of at
least 10A.
• The attachment plug must be an earth-grounding type with a
NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A, 250V)
configuration
United Kingdom
• The supply plug must comply with BS1363 (3-pin, 13A) and be
fitted with a 13A fuse that complies with BS1362
• The mains cord must <HAR> or <BASEC> marked and be of
type H03VVF3G1.0 (minimum)
Europe
Europa
• The supply plug must comply with CEE 7/7 (“SCHUKO”) The
mains cord must <HAR> or <BASEC> marked and be of type
H03VVF3G1.0 (minimum)
• Der Stromversorgungsstecker muss CEE 7/7 (“SCHUKO”)
entsprechen.
• Das Netzkabel muss von <HAR> oder <BASEC> gezeichnet
werden und sein Typ muss von H03VVF3G1.0 (Minimum) sein.
Denmark
• The supply plug must comply with section 107-2-D1, standard
DK2-1a or DK2-5a.
Switzerland • The supply plug must comply with SEV/ASE 1011
中国
• 电源线组件必须通过 CCC 认证。
The appliance coupler (the connector to the unit and not the connector to the wall plug) must have a
configuration for mating with an EN 60320 / IEC 320 appliance inlet.
Die Gerätesteckvorrichtung (der Anschluss an die Anlage, nicht an den Wandstecker) muss zu dem
Gerätestecker von EN 60320 / IEC 320 passende Konfiguration haben.
WARNING: For DC power supplied equipment, please use 2.5 mm 2 or 12 AWG minimum
power supply cord.
Warnung: Für mit Gleichstrom betriebene Ausrüstung benutzen Sie bitte eine 2.5mm
2 oder
xxAWG Zuleitung.
警告： DC电源设备，请使用2.5 mm 2 或12AWG电缆。
WARNING: Because the device has several power supplies, disconnect all of them to switch off
the device.
Warnung: Da das Gerät mehrere Energiequellen hat, ist es notwendig stets alle Verbindungen
zu unterbrechen, um den energiefreien Zustand zu erreichen.
警告：因为设备存在多种电源输入，在关闭设备时确保切断所有电源连接。