Electricity safety/elektrische sicherheit/用电安全, Hazardous voltage/gefährliche spannungen /危险电压, Electricity safety/elektrische sicherheit/用 电安全 – H3C Technologies H3C SecPath F100-C-SI Benutzerhandbuch

Seite 12

Advertising
background image

6

Europe

The supply plug must comply with CEE 7/7

(“SCHUKO”)

The mains cord must <HAR> or <BASEC> marked

and be of type H05VVF3G0.75 (minimum)

Denmark

The supply plug must comply with section 107-2-D1,
standard DK2-1a or DK2-5a.

Switzerland

The supply plug must comply with SEV/ASE 1011

Argentina

The power cord set must be certified by UL, IRAM,

TÜV (or other authorized certification body), for

three conductors cables.

The attachment plug must be an earth-grounding

type with an IRAM-2073 (10 A, 250 V).

中国

电源线组件必须通过

CCC 认证。

使用符合

GB1002,额定值为 250V/10A 的单相

两级带接地插头

电源线最小线径为

0.75mm

2

The appliance coupler (the connector to the unit and not the connector to
the wall plug) must have a configuration for mating with an EN 60320 /

IEC 320 C13 appliance inlet.

Die Gerätesteckvorrichtung (der Anschluss an die Anlage, nicht an den

Wandstecker) muss mit einer Konfiguration nach EN 60320 / IEC 320
C13 versehen.

Electricity Safety/Elektrische Sicherheit/用
电安全

Hazardous Voltage/Gefährliche Spannungen

/危险电压

Conducting articles, such as a watch, hand chain, bracelet or ring should
be removed during the installation.

Es ist nicht erlaubt während dieser Arbeiten leitende Gegenstände wie
Uhren, Armbänder, Armreifen und Ringe am Körper zu tragen.

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: