Crivit Floor Pump - Handbuch (Seite 2)

2
Congratulations on the purchase of your
new product. You have decided on a high-qua-
lity product. These instructions for use are a part
of the product. It contains important information
about safety, use and disposal. Please fami-
liarize yourself with all operating and safety
instructions before using this product. Only use
the product as described and for the specified
application. If you pass this product on to others
be sure to also include the documentation.
Contents
1x Instructions for use
1x Floor pump
1x Adapter for balls (G)
2x Adapter for inflatables (H)
Technical Data
Rated pressure: 6 bar / 87 PSI
Dimensions: 22.5 x 14 x 63cm (l x w x h)
Intended Use
This product is intended for private use to inflate
all common bicycle tyres with Schrader valve,
Dunlop valve and Presta valve, and to inflate
balls, air mattresses and similar inflatables.
Safety Instructions
Risk of Injury!
• Due to the high operating force and the
associated risks this product is not suitable
for use by children and individuals with
physical and/or mental limitations.
• Before each use check the product for
damage or wear. Discontinue use and
dispose if the product is defective, as a
defective product cannot be repaired.
• Risk of burning!
Friction may cause the
pump plunger and pump cylinder to heat up
with extended pumping. Only touch the
handle of the item after use.
• Only inflate items to the maximum pressure
specified by the manufacturer. On bicycle
tyres this information is typically found on the
tyre
wall.
Use
Only use this product on even ground. Always
stand with both feet on the floor plate (F) whilst
pumping to prevent the product from tipping.
Do not bend the pump tube (E)! Operate the
pump handle (A) evenly and not too fast.
A
A
B
C
D
E
F
G
H
GB/IE