Crivit DS-URBAN102 - Handbuch (Seite 9)

9 GB
Selecting the correct
helmet size
• Choose your helmet by measuring the cir-
cumference of your head with a flexible tape
measure . Always try on a couple of different
sizes before buying a close fitting helmet .
When wearing the helmet, the skin of your
temples should ideally move with it .
• Make sure that the helmet does not move
around when the retention system is open .
• The retention system must be set securely. The
chinstrap must sit comfortably under the chin
as far back towards the neck as possible .
Fasten it as tight as possible . The right degree
of tension is reached once you find it difficult
to insert your finger between the chinstrap and
neck, yet finding it easy to breath and swallow .
Make sure that the helmet sits securely once
the retention system is on . Make sure that the
helmet does not restrict your movements, e .g .
when turning your head to look behind you .
• Make sure the helmet carries a sticker certify-
ing homologation .
Maintenance and Care
Regular maintenance and care contributes to
safety and maintaining the helmet .
Cleaning of the Helmet
• Never use solvents, petrol or other detergents
when cleaning the shell and interior of your
helmet .
• Only use water and pH balanced soap.
Visor care and cleaning
• After using the helmet, lightly wipe off any
grime (e.g. dead insects, dirt, sand, dust etc )
from the visor with a soft cloth and then fully
wipe it clean using a dry soft cloth .
• When the visor gets wet (e.g. rainwater) it
should always be wiped with a soft cloth .
• When cleaning the visor, never use any petro-
leum-based solvents or detergents containing
abrasives .
Cleaning of the Cheek Pads,
Acoustic Pads and Inside Pads
• Hand wash below 30 °C.
• Allow to dry at room temperature.
• Avoid sources of heat.
• When not in use, store in a dry, well ventilated
place .
Storage
When not in use, store the helmet in a dry and
well ventilated place at room temperature .
Avoid sources of heat . Do not needlessly expose
the item to heat, e .g . in the car in hot outside
temperatures .
Disposal Instructions
Dispose of the product and all its components
through a licensed disposal company or your
municipal disposal facilities . Please observe the
current regulations . If in doubt, consult your dis-
posal facility about an environmentally friendly
disposal .
Size table
Size Head circumference
M 57 – 58 cm
L 59 – 60 cm
XL 61 cm