Safety advice / before use / bringing into use, Before use, Bringing into use – Florabest Z30597 Benutzerhandbuch
Seite 10
10 GB/IE
®
Safety advice / Before use / Bringing into use
Do not use the product for
drinks!
Fill the device only with liquids at
temperatures of 0 - 40 °C.
Before use
CAUTION! Check that the device is
functioning properly! Check the pressure
sprayer before each use to ensure that it
is free of visible damage and is func-
tioning safely. To do this, carry out the
following tests and inspections:
Check the pressure sprayer for
visible signs of damage
Check the container
5
for visible signs
of damage.
Check the suction hose
18
for visible
signs of damage.
Check the carrying strap
6
for visible
signs of damage.
Check connections
Check that the hose connections are fitted
tightly.
Check that the pipe connections are fitted
tightly.
Check that the pressure sprayer is
tight and leak-free
Pump the empty pressure sprayer to
approx. 2 bar.
The pressure must not fall more than ap-
prox. 0.5 bar in a space of 30 minutes.
Check operation of the safety
valve
Pump the pressure sprayer to approx.
2 bar.
Pull the safety valve
3
up to the stop.
You must be able to hear the pressure
escaping.
Bringing into use
Attaching the spray tube
without the extension
tube (Fig. B)
Turn the union nut
16
anticlockwise to
release it from the handle
17
. Push the
spray tube
12
into the handle
17
as
far as it will go.
Tighten the union nut
16
by turning it
clockwise.
Note:
You can also extend the spray
tube
12
by turning the lock nut
10
anti-
clockwise to release it and then pulling
out the extension. Then retighten the
lock nut
10
(see Fig. B).
Attaching the spray tube
with the extension tube
(Fig. C)
Loosen the union nut
15
slightly by turn-
ing it anticlockwise. Insert the spray
tube
12
into the union nut
15
.
Tighten the union nut
15
by turning it
clockwise.
Insert the extension tube
9
into the
union nut
16
.
Tighten the union nut
16
by turning it
clockwise.