Florabest Z30597 - Handbuch (Seite 12)

12 GB/IE ®
Bringing into use / Cleaning and care / Disposal
pressure of 2.5 bar. You can check the
operating pressure using the pressure
gauge
4 (see “Building up the operat-
ing pressure”).

Pull the safety valve 3 upwards as far
as it will go to release the residual pres-
sure in the container
5 .
 Cleaning and care
Note: Clean the pressure sprayer after
each use!
 Clean the pressure
sprayer

Unscrew the spray nozzle 11 .

Clean the spray nozzle 11 under running
water.

If the spray nozzle 11 is clogged,
clean it by pushing a needle through it.

Flush through the pressure sprayer,
pipes and tubes with water.

Clean the surfaces of the product with
a moist cloth.
 Clean the suction hose
Clean the suction hose 18 as follows:

Loosen the union nut of the suction hose
13 on the container 5 .

Pull the suction hose 18 out of the
tank 5 .

Clean the suction hose 18 under running
water.

After cleaning, insert the suction hose
18 back in its opening on the tank 5 .

Tighten the union nut 13 hand-tight.
 Store the pressure
sprayer

Clean the pressure sprayer before storing
it away.

Remove any leftover spray product from
the tank and the pipes.

Store the pressure sprayer in a dry,
dust-free place.
 Disposal
The packaging is made entirely
of recyclable materials, which
you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.
Product Information:
Pressure Sprayer
Model no.: Z30597
Version:
11 / 201
Y